BioFlo SB THF

Synthetic Blend Biodegradable Tractor Hydraulic Fluid

BioFlo SB THF is tractor hydraulic fluid formulated from a blend of natural and synthetic esters. It is readily biodegradable, with high-lubricity base oils and proprietary anti-wear and anti-corrosion additives. BioBlend’s tractor hydraulic fluid is a multifunctional oil for high-pressure tractor hydraulics, transmissions and final drives that share a common reservoir. BioFlo SB THF protects against varnish and sludge in harsh operating environments and is optimized for year round use, eliminating the need to change oils based on summer and winter conditions.

Suitable for use in any industry (construction, refuse, mining, dredging, marine, agriculture, forestry, etc.) utilizing mobile or stationary equipment where a UTTO is required, especially systems where a release into the environment is possible or where a leak or spill could reach a waste stream.

• Classified as Environmentally Acceptable Lubricants (EAL’s) as per the EPA’s guidance document that defines standards for Environmentally Acceptable Lubricants (EPA 800-R-11-002) and as required by EPA’s 2013 U.S. Vessel General Permit (VGP)
  • Meets Allison C3 & C-4 specification
  • Meets Caterpillar TO-2 specification
• Also Meets these Additional Specifications:
  • John Deere: J20 (A,B, Hy-Gard), *J20C & *J20D
  • API: GL-4
  • Case Corporation (J.I. Case/Case I.H.C.:
  • MS-1204, 1205, 1206 (Power­gard PFT)
  • MS-1207 (Hy-Tran Plus)
  • MS-1209 (Hy-Tran Plus)
  • MS-1210
  • JIC-143, 144, 145 (TCH Fluid)
  • JIC-185 (TFD Fluid)
  • Denison: (Pump only): HF-0, HF-1 & HF-2
  • Deutz-Allis: Hydraulic Trans Fluid
  • Fiat-Hesston: AF-87
  • H.C.: B-5 & B-6 Hytran
  • Oliver: Type 55, Type 5J & Q1802
  • Renk: Bus Automatic Trans. Fluid
  • Sauer Sunstrand/Danfoss: Hydro Static Trans. Fluid
  • Sperry Vickers/Eaton:
  • I-280-S
  • M2950-S
  • Steiger: Hydraulic Trans. Fluid
  • Versatile: Gear & Hydraulic Trans. Fluid
  • Volvo:
  • Including WB-101
  • White Farm
  • ZF Transmissions: TEML03 & TEML06

   * Meets the requirements of J20C & J20D with the exception of the low temperature Brookfield requirements. For these applications in temperatures less than -20F (-29C), use BioFlo FS THF.